CO Laser Power Supply for CO Laser Tubes

Application: EFR's CO2 laser power supply can be used together with CO2 laser tubes. With different types and models available, this laser equipment accessory can match laser tubes with different power levels.

The safe and reliable laser power supply can be connected directly to the laser cutting machine, laser engraving machine, and other laser equipment to achieve precision cutting and engraving on acrylic plastic, cloth, rubber plates, and leather products.

Parameters

Model  PS-N60/80 PS-N100 PS-N130/150
 Input Voltage  AC220V or AC110V (please specify when placing orders)
 AC Frequency  47-440Hz
Cold State Inrush Current  ≤60A (AC220V input)/≤30A (AC110V input) 
Leakage Current   ≤0.7mA (AC220V input)/≤0.4mA (AC220V input) 
Max. Output Voltage  DC 35KV  DC 50KV  DC 50KV 
 Max. Output Current DC 35mA  DC 35mA  DC 38mA 
 Efficiency  ≤92% full load
Mean Time Between Failures (MTBF)  ≤10,000 hours 
Response Time  ≤1ms ( starting from the switching signal being sent out to the output current reaching 90% of the rated current) 
Interface Control   TTL high/ low level switch 
 Voltage Withstand Input- output, input- housing; AC1,500V, 10mA, 60s; the output cathode is connected to the housing 
Protection  Short-time open circuit (safe ground connection is required to avoid electrical breakdown) 
 Working Environment Temperature: -10℃ to 40℃; Humidity: ≤90% 
Type of Cooling Forced air coolin
 Dimension L×W×H (mm) 250×139×107   285×139×107 352×139×107 

Features

Great Compatibility: Characterized by a high efficiency, frequency, and speed, the PS-N series CO2 laser power supply is a matched power supply for CO2 laser devices. With the great compatibility, it can easily and directly be connected to laser devices without a ballast.

High Efficiency: The laser equipment power supply features a high power transfer efficiency and can facilitate the start of the CO2 laser tube, enabling it to work properly, and ensure a prolonged service life.

Dual-Use Interface: The CO2 laser power supply is equipped with a dual-use interface, which can either be used to achieve closed-loop control, or to test the actual operating current of the laser tube.

Open Circuit Protection: The CO2 laser power supply for optical processing machinery can achieve open circuit protection. If the housing has a safe ground connection, the laser power supply can function on an open circuit for a short amount of time. This protection helps extend the service life of the laser power supply.

Specification

Name Model Dimension (L×W×H) (mm) Matched CO2 Laser Tube Warranty

CO2 Laser Power Supply

PS-N80 250×139 ×107 1200CL, F2, ZN1250, CL1600, ZX1450

12 Months

PS-N100 285×139 ×107 F4 ZN1450, ZX1450 12 Months
PS-N130-150 352×139 ×107 F6, F8, F10, ZN1650, ZN1850, ZX1650, ZX1850 12 Months

Properties

Thanks to a zero-current half bridge soft-switching current, the CO2 laser power supply has a high efficiency, short response time and easy interface control. It responds to signals sent by the TTL high/low level switch, and controls the switch on/off laser devices.

This laser power device is also equipped with a protection switch, which can effectively detect abnormal water and air ventilation. It can receive 0-5V analog signals, and a PWM signal to regulate laser power.

Aging Test: Each laser tube power supply must undergo a 10 hour, full-load operation under a 65℃ temperature. They must also undergo on/off switch tests every 7 seconds, and must do so 300 times.